System connectors and interfaces
Profile connectors and interfaces – baseplates, angle brackets, beam clamps, saddles and system nuts and bolts for connecting profiles and media in modular supports
115 Products
Filter
- Description
- Hot-dip galvanised (HDG) wing nut for connecting modular support system components
- Material composition
- Wings: plastic PA, Nut: C4C - DIN EN 10263
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) 90-degree angle for connecting multiple MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) 90-degree heavy angle for connecting multiple MQ strut channels in medium/heavy-duty applications
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) channel connector for two-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) channel connector for three-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) beam clamp for connecting MQ strut channels directly to steel beams
- Material composition
- Claw plate: S235JR - DIN EN 10025, U-bolt: S235JRG2 - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) angle brace for brackets
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) pipe clamp saddle for connecting threaded components to MQ strut channels
- Material composition
- Nut: EN-GJMW-450-7 - DIN EN 1562, Plate: S235JR - DIN EN 10025, Plastic: PB
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) base plate for connecting threaded components to MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised channel foot for fastening channels to different base materials at an angle
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) channel foot for fastening channels to concrete
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) clamp for cross-connection of one MQ strut channel to another
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) channel foot for fastening channels to concrete in light/medium-duty applications
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised channel foot for fastening strut channels to concrete
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) channel foot for fastening channels to concrete at an angle
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG plus) wing nut for connecting modular support system components
- Material composition
- Wings: plastic PA, Nut: QStE 380 TM, SEW 92
- Surface finish
- Outdoor Coated - HDG Plus
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) beam clamp for connecting MQ strut channels directly to steel beams
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) clamp for fastening MQ strut channels to concrete
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised flat channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG plus) channel connector for joining any elements with a butterfly opening
- Product class
- Ultimate
- Material composition
- Plate: S380MC, Nut: S355MC - DIN EN 10149-2, Bolt: grade 8.8 - DIN EN ISO 898
- Surface finish
- Outdoor Coated - HDG Plus
- Description
- Stainless steel (A4) channel connector for joining any elements with a butterfly opening
- Material composition
- Screw: A4-70 - DIN ISO 3506-1, Nut: 1.4581 (A4) - DIN EN 10283, Plate: 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Stainless steel wing nut for connecting modular support system components
- Material composition
- Nut: 1.4581 (A4) - DIN EN 10283, Wings: plastic PA
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Stainless steel (A4) 90-degree angle for connecting multiple MQ strut channels
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) 90-degree heavy angle for connecting multiple MQ strut channels in medium/heavy-duty applications
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Stainless steel (A4) channel connector for two-dimensional structures
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) flexible channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) beam clamp for connecting MQ strut channels directly to steel beams
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L, Nut: A4-70 - DIN EN ISO 3506-2
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 6 mm
- Description
- Stainless steel pipe clamp saddle for connecting threaded components to MQ strut channels
- Material composition
- Nut: 1.4581 (A4) - DIN EN 10283, Plate: 1.4404 (A4) – EN 10088, AISI 316L, Plastic: PB
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Stainless steel (A4) channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) channel foot for fastening channels to various base materials
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Stainless steel clamp for fastening one MQ strut channel to another
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) channel connector for three-dimensional structures
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) beam clamp for connecting MQ strut channels directly to steel beams
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L, Screw: A4-70- DIN EN ISO 3506-1
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Hot-dip galvanised (HDG) connector for fastening U-bolts to MI girders with greater adjustability
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connector for fastening U-bolts to MI girders
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) single beam clamp for connecting MI steel baseplates to steel beams
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connector for fastening MQ strut channels perpendicular to MI girders
- Material composition
- Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 40 µm - DIN EN ISO 10684
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connector for fastening pipe shoes to MI girders for heavy-duty applications with expansion
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connector for fastening MQ strut channels parallel to MI girders
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connectors for flexible installation of horizontal divider beams in lift shafts
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connector used to connect MI girders longitudinally for long spans in heavy-duty applications
- Material composition
- Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connector used with MI baseplates that allow for free positioning of the girder
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanised, adjustable angle connector for the 90-degree attachment of MC-3D channels to one another outdoors
- Material composition
- Structural steel with minimum yield strength of 235 N/mm2
- Surface finish
- Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) connector for fastening MC-3D installation channels to a concrete substructure or another channel outdoors – either perpendicularly or at an angle
- Material composition
- Structural steel with minimum yield strength of 235 N/mm2
- Surface finish
- Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) connector for fastening MC installation channels perpendicularly to concrete substructures with higher load requirements outdoors
- Material composition
- Structural steel with minimum yield strength of 235 N/mm2
- Surface finish
- Hot-dip galvanized, 56 µm - ASTM A153
- Description
- Hot-dip galvanised (HDG) wing nut for fastening threaded components/bolts to the open face of MC installation channels
- Material composition
- QStE 380 TM - SEW 092
- Surface finish
- Multi-layer coating, designed for corrosion environment category C3 according to ISO 9223
- Description
- Hot-dip galvanised (HDG) angle connector for 90-degree attachment of MC-3D channels to one another with higher load requirements outdoors
- Material composition
- Structural steel with minimum yield strength of 235 N/mm2
- Surface finish
- Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness
- 4 mm
- Description
- Heavy-duty adjustable baseplate for connecting an MT girder horizontally between two parallel walls
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- Base 8 mm
New
- Description
- Galvanised beam clamp for fastening threaded rods to steel girders without internal thread
- Base material type
- Steel
- Material composition
- EN-GJMB – EN 1562
- Surface finish
- Indoor Coated - Electro galvanised
New
- Description
- Galvanised beam clamp for fastening threaded rods to steel girders with internal thread
- Base material type
- Steel
- Material composition
- EN-GJMB – EN 1562
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised retaining strap for fastening MAB beam clamps more securely
- Base material type
- Steel
- Material composition
- Steel
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Premium galvanised 2-hole base plate for light-duty fixed point applications (metric)
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)